{"product_id":"godox-ct-16-flash-trigger-transmitter","title":"Godox CT-16 Flash Trigger Transmitter + Receiver Set (Black)","description":"\u003ch2\u003eGodox CT-16 Overview\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal sender and a receiver trigger and works by means of the frequency modulation wireless remote control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signal. The circuit of the transmitter has the function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one battery; continuously trigger for thirty thousand times.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eReceiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the decoding, which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1\/250sec.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll the models of the product uniquely have the multi-frequency isolation technique and the self coding matching function by users. Users can freely match and use the sender and the receiver according to the demands, which have 16 isolated channels to suit for specific shooting environments. Triggers set in different channels can be combined to work or independently work but do not interfere with each other in an efficient distance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e- Universal hot shoe interface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e- 433MHz transmit frequency secures fast response and stable transmission\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e16 channels, transmitting distance up to 30m, no limits with directions or angles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaximum synchronous speed up to 1\/250 second\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWith studio flash interface, can wirelessly trigger several kinds of studio flashes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSpeedy frequency regulation, convenient for photographers to shoot\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEnergy-saving design with 12V 23A battery for transmitter and two AAA batteries (not included) for receiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eComes with a PC sync cord for cameras without hot shoe connections\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNote: This trigger does not support TTL function.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eInsert the transmitter's hot shoe socket into your camera's hot shoe jack, plug the flash onto the receiver, and switch ON the receiver. Make sure the channel selector of both transmitter and receiver at same channel. Press the Test button on the transmitter to test before shooting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf your camera does not have hot shoe socket for connecting the transmitter you can connect the transmitter to the camera by the PC Sync Cord provided. (Only the old camera needed).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can trigger both the flashgun and studio lights with this flash trigger. If you use the receiver on big studio strobe flashlight or AC slave flash, you can just connect the receiver to the studio strobe flashlight with 3.5mm or 6.35mm jack plug PC Sync cord (not included).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eCompatible with\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFor Nikon SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor Canon 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX\/EXII, 430EZ, 420EX, 420EZ, 380EX; \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor Olympus FL-50, FL36;\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor Sigma EF-500 DG Super, EF-500 DG ST, EF-430;\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor Vivitar 285HV (Older Vivitar 285\/283 works only with PC sync);\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOther flash models with a trigger voltage of 12V or lower;\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWork with flash units using universal hot shoe like for Nikon, for Sigma, for Olympus, for Pentax (except for SONY as they use a special hot shoe)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eModel: CT-16\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eChannel: 16 Channels\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTransmit Frequency: 433MHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTransmitter Power: 12V 23A lithium battery (Not included)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReceiver Power: 2 x 1.5V AAA Battery (Not included)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOutdoor operation distance: max. 30m \/ 90feet (open area, no fraise)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIndoor operation distance: max. 25m \/ 75feet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSynchronous speed: Max. 1\/250sec\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTransmitter Dimension: 60x42x30mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReceiver Dimension: 90x50x32mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eColor: Black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaterial: Metal + Plastic\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003ePackage Included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x CT-16 Transmitter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x CTR-16 Receivers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x Sync Cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 x Convert Adapter\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Godox","offers":[{"title":"Default Title","offer_id":46188608520359,"sku":"","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/2319\/9399\/files\/GodoxCT-16_main.png?v=1729670915","url":"https:\/\/www.inshinedigital.com\/de\/products\/godox-ct-16-flash-trigger-transmitter","provider":"inshinedigital","version":"1.0","type":"link"}